Real and effective Cisco 100-105 exam dumps, practice tests, and Cisco expert recommendations

How Can I Get Authentic 100-105 Exam Dumps? Jrocam shares the latest and effective Cisco 100-105 exam questions and answers, online practice tests, and the most authoritative Cisco exam experts update 100-105 exam questions throughout the year. Get the full 100-105 exam dumps selection: https://www.leads4pass.com/100-105.html (773 Q&As). Pass the exam with ease!

Table of Contents:

Latest Cisco 100-105 google drive

[PDF] Free Cisco 100-105 pdf dumps download from Google Drive: https://drive.google.com/open?id=1i2WULjskk7jt4kfeqhymCfUADmvnTmet

100-105 ICND1 – Cisco:https://www.cisco.com/c/en/us/training-events/training-certifications/exams/current-list/100-105-icnd1.html

This exam tests a candidate’s knowledge and skills related to network fundamentals, LAN switching technologies, routing technologies, infrastructure services, and infrastructure maintenance.

Latest updates Cisco CCNA 100-105 exam practice questions

QUESTION 1
If all OSPF routers in a single area are configured with the same priority value, what value does a router use for the
OSPF router ID in the absence of a loopback interface?
A. the IP address of the first Fast Ethernet interface
B. the IP address of the console management interface
C. the highest IP address among its active interfaces
D. the lowest IP address among its active interfaces
E. the priority value until a loopback interface is configured
Correct Answer: C

QUESTION 2
Which statement about DHCP address pools is true?
A. A network must be defined before you can configure a manual binding.
B. Only one DNS server can be identified for an individual DHCP group.
C. You can use a subnet mask of prefix length to define a network.
D. The domain name of the DHCP pool is specified in the global configuration of the router.
Correct Answer: C

QUESTION 3
Which IPv6 routing protocol uses multicast group FF02::9 to send updates?
A. static
B. RIPng
C. OSPFv3
D. IS-IS for IPv6
Correct Answer: B

QUESTION 4
Refer to the exhibit.lead4pass 200-125 exam question q4

Which command is simplest to configure routing between the regional office network 10.89.0.0/20 and the corporate
network?
A. router2(config)#ip route 0.0.0.0 0.0.0.0 10.89.16.1
B. router2(config)#ip route 10.89.3.0 255.255.0.0 10.89.16.2
C. router1(config)#ip route 10.89.0.0 255.255.240.0 10.89.16.1
D. router1(config)#ip route 10.89.0.0 255.255.240.0 10.89.16.2
Correct Answer: A
The fourth command makes it possible for all hosts beyond R2 and all hosts beyond R1 to interact with each other,
hence it is the simplest technique.

QUESTION 5
Which two attributes of a packet change at every router along the path from source to destination? (Choose two.)
A. destination IP address
B. source MAC address
C. packet MTU
D. source IP address
E. destination MAC address
Correct Answer: BE

QUESTION 6
Drag and Drop Question On the left are various network protocols. On the right are the layers of the TCP/IP model.
Assuming a reliable connection is required, move the protocols on the left to the TCP/IP layers on the right to show the
proper encapsulation for an email message sent by a host on a LAN. (Not all options are used)
Select and Place:lead4pass 200-125 exam question q6

Correct Answer:

lead4pass 200-125 exam question q6-1

+ application layer: SMTP
+ transport layer: TCP
+ internet layer: IP
+ network access layer: Ethernet

QUESTION 7
What are the two minimum required components of a DHCP binding? (Choose two.)
A. a DHCP pool
B. an exclusion list
C. a hardware address
D. an IP address
E. an ip-helper statement
Correct Answer: CD

QUESTION 8
Which NTP command configures the local device as an NTP reference clock source?
A. ntp peer
B. ntp broadcast
C. ntp master
D. ntp server
Correct Answer: C

QUESTION 9
R1 is configured with the default configuration of OSPF. From the following list of IP addresses configured on R1, which
address will the OSPF process select as the router ID?lead4pass 200-125 exam question q9

A. 192.168.0.1
B. 172.16.1.1
C. 172.16.2.1
D. 172.16.2.225
Correct Answer: A
The Router ID (RID) is an IP address used to identify the router and is chosen using the following sequence:
+
The highest IP address assigned to a loopback (logical) interface.
+
If a loopback interface is not defined, the highest IP address of all
active router\\’s physical interfaces will be chosen.
+
The router ID can be manually assigned
In this case, because a loopback interface is not configured so the highest active IP address 192.168.0.1 is chosen as
the router ID.

QUESTION 10
How to configure RIPv2? (Choose Two.)
A. Enable RIP
B. Connect RIP to WAN interface
C. Enable no auto-summary
D. Enable authentication
Correct Answer: AC

QUESTION 11
SW-C has just been added to the network shown in the graphic.lead4pass 200-125 exam question q11

What is the purpose of assigning a default gateway to this switch?
A. allows connectivity to Router B from the switch prompt
B. allows console port connectivity to the switch from Host A
C. allows connectivity to remote network devices from Host B
D. allows the switch to pass traffic between Host A and Host B
Correct Answer: A

QUESTION 12
Which statement about DNS lookup on a Cisco router is true?
A. When it is disabled, the administrator must use IP addresses to reach to network devices.
B. When it is enabled, the router queries a public DNS, by default, for network device name resolution.
C. When it is disabled, reachability to end users and hosts must be addressed through their IP addresses.
D. It is disabled by default.
Correct Answer: C

QUESTION 13
For which reason does a DNS client use a DNS server?
A. to assign an IP address
B. to verify network connectivity
C. to resolve an FQDN to an IP address
D. to resolve an IP address to an FQDN
Correct Answer: C

Related 100-105 Popular Exam resources

titlepdf youtube Cisco lead4pass Lead4Pass Total Questions
Cisco lead4pass 100-105 dumps pdf lead4pass 100-105 youtube 100-105 ICND1 – Cisco https://www.leads4pass.com/100-105.html 773 Q&A
lead4pass 200-125 dumps pdf lead4pass 200-125 youtube 200-125 CCNA – Cisco https://www.leads4pass.com/200-125.html 1288 Q&A
200-301 CCNA – Cisco lead4pass 200-301 dumps 60 Q&A

Lead4Pass Year-round Discount Code

lead4pass coupon code:lead4pass2020

What are the advantages of Lead4pass?

Lead4pass employs the most authoritative exams from Cisco, Microsoft, CompTIA, Oracle, EMC, etc. We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!

about lead4pass

Summarize:

It’s not easy to pass the Cisco 100-105 exam, but with accurate learning materials and proper practice, you can crack the exam with excellent results. https://www.leads4pass.com/100-105.html provides you with the most relevant learning materials that you can use to help you prepare.